Heavy-duty capabilities

Five product lines,
engineered for
extreme pressure.

Om Tubes & Fittings Industries manufactures tube fittings, valves and instrumentation tubing in Mumbai, India. Explore the range and prepare your enquiry with our specification guide.

01ASTM A182 · NACE MR0175

Twin-ferrule compression fittings

High-vibration-resistant, gaugeable double-ferrule design giving leak-tight integrity across impulse and sample lines.

UnionsHP elbowsTeesReducers

Review fitting specs→

Stainless steel instrumentation ball valve

Up to 10,000 PSI

Process & instrument valves

Precision-machined from solid forged bar stock — no casting defects — for needle, ball and multi-valve manifold builds.

NeedleTrunnion ballCheck2·3·5-way

Source valve packages→

0315K–60K PSI

High-pressure tubing components

Anti-vibration coned-and-threaded connections for wellhead control panels and injection skids.

Inquire for skid pricing→

04DBB

Modular double block & bleed valves

Compact single-body construction, eliminating multi-joint leak paths in hydrocarbon containment.

Request DBB datasheet→

Bundle of seamless stainless instrumentation tubing

ASTM A269 · A213 · A312

Exotic alloy & stainless tubing

Bright-annealed seamless straight lengths and long coils, prepped for field bending and orbital welding.

Browse alloy grades→

How it works — bar to bundle

01 / 07

Reception.

BAR, HOLLOW AND FORGING STOCK BOOKED AGAINST AN APPROVED HEAT. MILL CERTIFICATES ARE READ BEFORE THE STRAPPING COMES OFF. HOLD · PMI ON RECEIPT

02 / 07

CNC.

THE FLOOR RUNS MULTI-AXIS TURNING AND MILLING CELLS UNDER ONE ROOF, SO A PART NEVER LEAVES THE BUILDING BETWEEN OPERATIONS.

03 / 07

Forged.

STOCK IS HEATED AND UPSET TO A NEAR-NET SHAPE, THEN NORMALISED. GRAIN FLOW FOLLOWS THE BODY RATHER THAN BEING CUT ACROSS IT.

04 / 07

Machined.

BAR IS TURNED, DRILLED AND THREADED ON CNC CELLS. FIRST-OFF IS GAUGED BEFORE THE RUN, AND EVERY PIECE AFTER IT AGAINST THE SAME SETTING. HOLD · FIRST-OFF

05 / 07

Inspected.

DIMENSIONAL CHECK AGAINST THE GAUGE, HARDNESS, POSITIVE MATERIAL IDENTIFICATION AND A PRESSURE TEST ON THE SAMPLING PLAN. HOLD · TPI WELCOME

06 / 07

Packed.

COUNTED, BAGGED AND BOXED; TUBE BUNDLED INTO ISPM-15 HEAT-TREATED CRATES. THE HEAT NUMBER AND ITS TEST CERTIFICATE TRAVEL WITH THE GOODS. HOLD · CERTIFICATE

07 / 07

Shipped.

SEA-WORTHY PACKED AND CONTAINERISED. DOCUMENTS, MTC AND THE INSPECTION RELEASE MOVE WITH THE CONSIGNMENT TO THE PORT.

All seven stages, in detail→

Qualifications

Paper that
travels with it.

Certification is not a badge on a homepage. Every consignment leaves with the documents that let your inspector accept it without a phone call.

Mechanically attached fittings ASTM F1387-23 OTFI brand fittings tested to the 2023 standard for mechanically attached fittings — the performance the rest of the range is built to.

ISO 9001:2015 Quality management, audited annually.

ISO 45001:2018 Occupational health & safety.

ISO 14001:2015 Environmental management.

PED 2014/68/EU Pressure equipment directive, to EN 764-5 and AD 2000-Merkblatt W0.

MSS SP Built to the Manufacturers Standardization Society standard practices for valves, fittings, flanges and pipe supports.

2 Star Export House Status holder recognition for export performance.

Interchangeability with Swagelok® Double-ferrule fittings inspected against Swagelok® and found to interchange when assembled to the recommended instructions.

With every consignment EN 10204 3.1 material test certificate Raised against the heat the parts were made from. Full certificates on file and sent with the quotation on request.

Materials

Whatever grade
the spec calls for.

Standard fittings and tubing ship in 316/316L. The same tooling runs the rest of the range, with the same heat-traceable certificate trail behind every one. Hover a grade and the band takes its colour.

316 / 316Lstandard 304 / 304L 321 904L Duplex 2205S31803 Super duplex 2507S32750 Alloy 625 Alloy 825 Monel 400 Titanium Gr 2 Hastelloy C-276 Carbon & alloy steel

See it on the part→ Request a grade not listed→

Registrations & reach

01 // REGISTRATION Audit Verified

Approved By

Vendor registration held directly in our own name following site & quality management audits.

Reg. Vendor

Approved

02 // PROJECT DELIVERIES 3rd-Party Inspected

Supplied To

Fittings & piping components delivered against operator specifications & TPI release.

01 / 05 · The elbow

Skip story ↗

The OM6 fitting, part by part

Four parts. One seal.
Two of them are ferrules.

A ¼-inch OM6 union elbow in 316L, straight off the line. Follow this fitting from the outside in, then onto the test bench.

OM6 union elbow¼ inch316L

What is inside the nut

One connection.
Every part has a role.

Scroll to open one end of the elbow and reveal the two ferrules. Select a part to explore its role.

AssembledFour components. One connection.

04 / 04

The foundation.

The elbow body turns the flow through 90 degrees and provides the seat for the front ferrule.

Before the bench, the standard

A small fitting.
A demanding programme.

ASTM F1387-23 puts the connection through repeated assembly, pressure, bending and more. Explore what each test asks of the fitting.

Ask for the test report

From the part to the proof

Same elbow.
Our hydrostatic bench.

The connection is assembled onto the tube. Now the pressure rises. Watch the actual bench footage and follow what happens to the joint.

Bench camera · Taloja test cell

The connection, after the test

The tube let go.
The fitting didn't.

The wall failed away from the joint. The ferrules held the tube, and the connection stayed sealed.

28,000 psiTube wall failure

3.7×Stated working pressure

See the supporting test report

OM6 · The same connection

OM6 / CONNECTION ANATOMYScroll to open · drag to rotate

The front ferrule, back ferrule and compression nut

Explore the assembly0%

Illustrative assembly

Examination · Dimensions, finish and marking are checked before the loading tests begin.

Bench footage · OM6 connection

Scroll to follow the elbow · or choose a chapter below.

Field deployments

Engineered for
severe-duty service.

Five sectors take the bulk of what leaves the plant. Each one sets its own corrosion, temperature and pressure case — and its own certificate trail.

01 / 05

Upstream oil & gas

Christmas trees, wellhead manifolds, top-side skids and subsea tie-backs — NACE MR0175 compliant.

02 / 05

Refining & midstream

Hydrocracking units, delayed coking, catalytic reformers and high-temperature flare lines.

03 / 05

Petrochemical & fertiliser

Ammonia, urea synthesis and aggressive acid process piping.

04 / 05

Power & steam generation

Boiler superheater tubes, high-pressure steam distribution and condenser lines.

05 / 05

Marine & subsea

Ballast water treatment, FPSO topside piping and high-salinity seawater intake.

Streamlined procurement

Send your BOM for
fast cross-referencing.

Eliminate single-source supply-chain bottlenecks. Drop your project MTO or competitor part numbers into our cross-reference engine — our engineers match exact technical equivalents (Swagelok®, Parker®, Parker Autoclave®) and return a fully compliant, itemised quote within 24 hours.

Drag & drop your MTO, BOM or CAD drawings here Accepts .xlsx, .csv, .pdf, .dwg. Or click to choose files.

Files stay on your machine — the button below opens your email client with the details filled in, and you attach the list above before sending.

Name

Company

Direct line / email

Country

Part numbers / MTO items

Technical notes — grades, end connections, TPI requirements

Engineering quotes returned within one working day (Monday–Saturday, IST). Priority dispatch for emergency shutdown & turnarounds.